dmesg - Intel Xeon E5-2620 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-128-generic (buildd@lgw01-amd64-055) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.4) ) #154~14.04.1-Ubuntu SMP Fri May 25 14:58:51 UTC 2018 (Ubuntu 4.4.0-128.154~14.04.1-generic 4.4.131)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007dd04fff] usable
BIOS-e820: [mem 0x000000007dd05000-0x000000007dd93fff] reserved
BIOS-e820: [mem 0x000000007dd94000-0x000000007de9cfff] ACPI data
BIOS-e820: [mem 0x000000007de9d000-0x000000007e0c2fff] ACPI NVS
BIOS-e820: [mem 0x000000007e0c3000-0x000000007f364fff] reserved
BIOS-e820: [mem 0x000000007f365000-0x000000007f7fffff] ACPI NVS
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Supermicro X9DRD-7LN4F(-JBOD)/X9DRD-EF/X9DRD-7LN4F, BIOS 3.0a 12/05/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FE000000000 write-back
1 base 002000000000 mask 3FFF80000000 write-back
2 base 000080000000 mask 3FFF80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 128GB, range: 2GB, type WB
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 131072M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 32GB, type WB
reg 5, base: 64GB, range: 64GB, type WB
reg 6, base: 128GB, range: 2GB, type WB
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7dd05 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdb20-0x000fdb2f] mapped at [ffff8800000fdb20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000092000] 92000 size 28672
Using GB pages for direct mapping
BRK [0x02219000, 0x02219fff] PGTABLE
BRK [0x0221a000, 0x0221afff] PGTABLE
BRK [0x0221b000, 0x0221bfff] PGTABLE
RAMDISK: [mem 0x341b4000-0x360d1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM)
ACPI: XSDT 0x000000007DDC9090 00009C (v01 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: FACP 0x000000007DDD3790 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: DSDT 0x000000007DDC91B8 00A5D6 (v02 SUPERM SMCI--MB 00000000 INTL 20091112)
ACPI: FACS 0x000000007E0BA080 000040
ACPI: APIC 0x000000007DDD3888 0001B4 (v03 00000001 AMI 00010013)
ACPI: FPDT 0x000000007DDD3A40 000044 (v01 00000001 AMI 00010013)
ACPI: SRAT 0x000000007DDD3A88 000430 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 0x000000007DDD3EB8 000030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 0x000000007DDD3EE8 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005)
ACPI: PRAD 0x000000007DDD3F20 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000)
ACPI: SPMI 0x000000007DDD3FE0 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 0x000000007DDD4020 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112)
ACPI: EINJ 0x000000007DE9BB08 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x000000007DE9BC38 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x000000007DE9BE68 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x000000007DE9BF10 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 0x000000007DE9BF40 000160 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: MCFG 0x000000007DE9C0A0 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
NODE_DATA(0) allocated [mem 0x107fffb000-0x107fffffff]
NODE_DATA(1) allocated [mem 0x207fff8000-0x207fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000207fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000099fff]
node 0: [mem 0x0000000000100000-0x000000007dd04fff]
node 0: [mem 0x0000000100000000-0x000000107fffffff]
node 1: [mem 0x0000001080000000-0x000000207fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
On node 0 totalpages: 16768158
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 7989 pages used for memmap
DMA32 zone: 511237 pages, LIFO batch:31
Normal zone: 253952 pages used for memmap
Normal zone: 16252928 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff]
On node 1 totalpages: 16777216
Normal zone: 262144 pages used for memmap
Normal zone: 16777216 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 24 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7dd05000-0x7dd93fff]
PM: Registered nosave memory: [mem 0x7dd94000-0x7de9cfff]
PM: Registered nosave memory: [mem 0x7de9d000-0x7e0c2fff]
PM: Registered nosave memory: [mem 0x7e0c3000-0x7f364fff]
PM: Registered nosave memory: [mem 0x7f365000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:2
PERCPU: Embedded 34 pages/cpu @ffff88103fa00000 s99608 r8192 d31464 u262144
pcpu-alloc: s99608 r8192 d31464 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 12 13 [0] 14 15 16 17 -- -- -- --
pcpu-alloc: [1] 06 07 08 09 10 11 18 19 [1] 20 21 22 23 -- -- -- --
Built 2 zonelists in Node order, mobility grouping on. Total pages: 33021203
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 131964076K/134181496K available (8333K kernel code, 1322K rwdata, 4020K rodata, 1512K init, 1316K bss, 2217420K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=24.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=24
NR_IRQS:33024 nr_irqs:1432 16
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2000.127 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.25 BogoMIPS (lpj=8000508)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Speculation control IBPB not-supported IBRS not-supported
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 32K
ftrace: allocating 32267 entries in 127 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: APIC(20) Converting physical 1 to logical package 1
smpboot: Max logical packages: 4
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000dfffc000 flags: 0x1
DMAR: dmar1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x0000007dd6a000 end: 0x0000007dd76fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
DMAR: RHSA base: 0x000000dfffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffe000 IOMMU 0
DMAR-IR: IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xdfffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5
.... node #1, CPUs: #6 #7 #8 #9 #10 #11
.... node #0, CPUs: #12 #13 #14 #15 #16 #17
.... node #1, CPUs: #18 #19 #20 #21 #22 #23
x86: Booted up 2 nodes, 24 CPUs
smpboot: Total of 24 processors activated (96023.86 BogoMIPS)
devtmpfs: initialized
Using 2GB memory block size for large-memory system
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7de9d000-0x7e0c2fff] (2252800 bytes)
PM: Registering ACPI NVS region [mem 0x7f365000-0x7f7fffff] (4829184 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 22:28:46, date: 06/14/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xdfc1c000-0xdfc1ffff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xdfc18000-0xdfc1bfff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xdfc14000-0xdfc17fff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xdfc10000-0xdfc13fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xdfc0c000-0xdfc0ffff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xdfc08000-0xdfc0bfff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xdfc04000-0xdfc07fff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xdfc00000-0xdfc03fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xdfc25000-0xdfc25fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdfc23000-0xdfc233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdfc22000-0xdfc223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 0x14: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 0x18: [io 0x9030-0x9037]
pci 0000:00:1f.2: reg 0x1c: [io 0x9020-0x9023]
pci 0000:00:1f.2: reg 0x20: [io 0x9000-0x901f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdfc21000-0xdfc217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdfc20000-0xdfc200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f]
pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1000:0086] type 00 class 0x010700
pci 0000:03:00.0: reg 0x10: [io 0x8000-0x80ff]
pci 0000:03:00.0: reg 0x14: [mem 0xdfa40000-0xdfa4ffff 64bit]
pci 0000:03:00.0: reg 0x1c: [mem 0xdfa00000-0xdfa3ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xdf900000-0xdf9fffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:02.2: bridge window [mem 0xdf900000-0xdfafffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [8086:1521] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdfb60000-0xdfb7ffff]
pci 0000:05:00.0: reg 0x18: [io 0x7060-0x707f]
pci 0000:05:00.0: reg 0x1c: [mem 0xdfb8c000-0xdfb8ffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: reg 0x184: [mem 0xde0e0000-0xde0e3fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR0 space: [mem 0xde0e0000-0xde0fffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.0: reg 0x190: [mem 0xde0c0000-0xde0c3fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR3 space: [mem 0xde0c0000-0xde0dffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:05:00.1: [8086:1521] type 00 class 0x020000
pci 0000:05:00.1: reg 0x10: [mem 0xdfb40000-0xdfb5ffff]
pci 0000:05:00.1: reg 0x18: [io 0x7040-0x705f]
pci 0000:05:00.1: reg 0x1c: [mem 0xdfb88000-0xdfb8bfff]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: reg 0x184: [mem 0xde0a0000-0xde0a3fff 64bit pref]
pci 0000:05:00.1: VF(n) BAR0 space: [mem 0xde0a0000-0xde0bffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.1: reg 0x190: [mem 0xde080000-0xde083fff 64bit pref]
pci 0000:05:00.1: VF(n) BAR3 space: [mem 0xde080000-0xde09ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:05:00.2: [8086:1521] type 00 class 0x020000
pci 0000:05:00.2: reg 0x10: [mem 0xdfb20000-0xdfb3ffff]
pci 0000:05:00.2: reg 0x18: [io 0x7020-0x703f]
pci 0000:05:00.2: reg 0x1c: [mem 0xdfb84000-0xdfb87fff]
pci 0000:05:00.2: PME# supported from D0 D3hot D3cold
pci 0000:05:00.2: reg 0x184: [mem 0xde060000-0xde063fff 64bit pref]
pci 0000:05:00.2: VF(n) BAR0 space: [mem 0xde060000-0xde07ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.2: reg 0x190: [mem 0xde040000-0xde043fff 64bit pref]
pci 0000:05:00.2: VF(n) BAR3 space: [mem 0xde040000-0xde05ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:05:00.3: [8086:1521] type 00 class 0x020000
pci 0000:05:00.3: reg 0x10: [mem 0xdfb00000-0xdfb1ffff]
pci 0000:05:00.3: reg 0x18: [io 0x7000-0x701f]
pci 0000:05:00.3: reg 0x1c: [mem 0xdfb80000-0xdfb83fff]
pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
pci 0000:05:00.3: reg 0x184: [mem 0xde020000-0xde023fff 64bit pref]
pci 0000:05:00.3: VF(n) BAR0 space: [mem 0xde020000-0xde03ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.3: reg 0x190: [mem 0xde000000-0xde003fff 64bit pref]
pci 0000:05:00.3: VF(n) BAR3 space: [mem 0xde000000-0xde01ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:03.2: PCI bridge to [bus 05-06]
pci 0000:00:03.2: bridge window [io 0x7000-0x7fff]
pci 0000:00:03.2: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:00:03.2: bridge window [mem 0xde000000-0xde0fffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:08:01.0: [102b:0532] type 00 class 0x030000
pci 0000:08:01.0: reg 0x10: [mem 0xdd000000-0xddffffff pref]
pci 0000:08:01.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
pci 0000:08:01.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:7f: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [PME AER]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io 0xa000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff window]
pci_bus 0000:80: root bus resource [bus 80-fe]
pci 0000:80:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: System wakeup disabled by ACPI
pci 0000:80:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: System wakeup disabled by ACPI
pci 0000:80:02.2: [8086:3c06] type 01 class 0x060400
pci 0000:80:02.2: PME# supported from D0 D3hot D3cold
pci 0000:80:02.2: System wakeup disabled by ACPI
pci 0000:80:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:80:04.0: reg 0x10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:80:04.1: reg 0x10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:80:04.2: reg 0x10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:80:04.3: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:80:04.4: reg 0x10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:80:04.5: reg 0x10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:80:04.6: reg 0x10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:80:04.7: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf20000-0xfbf20fff]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.2: PCI bridge to [bus 83]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI Error: [\_SB_.PRAD] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_GPE._L24] (Node ffff88103f5bff28)
vgaarb: setting as boot device: PCI:0000:08:01.0
vgaarb: device added: PCI:0000:08:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7dd05000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
, AE_NOT_FOUND (20150930/psparse-542)
clocksource: Switched to clocksource hpet
ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L24] (20150930/evgpe-592)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xdfffc000-0xdfffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [mem 0x00000400-0x000004ff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0b00-0x0b7f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0400-0x0453] has been reserved
system 00:08: [io 0x0458-0x047f] has been reserved
system 00:08: [io 0x1180-0x119f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io 0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0b: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:02.2: bridge window [mem 0xdf900000-0xdfafffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.2: PCI bridge to [bus 05-06]
pci 0000:00:03.2: bridge window [io 0x7000-0x7fff]
pci 0000:00:03.2: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:00:03.2: bridge window [mem 0xde000000-0xde0fffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:00: resource 11 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdfafffff]
pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:05: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:05: resource 2 [mem 0xde000000-0xde0fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xdf000000-0xdf8fffff]
pci_bus 0000:08: resource 2 [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:08: resource 10 [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:08: resource 11 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:08: resource 12 [mem 0x80000000-0xdfffffff window]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.2: PCI bridge to [bus 83]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:08:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 31864K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x79d05000-0x7dd05000] (64MB) mapped at [ffff880079d05000-ffff88007dd04fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain dram 2^-16 Joules
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1529015326.404:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfc23000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-128-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfc22000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-128-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 1999.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85afc727, max_idle_ns: 881590685098 ns
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Hermon USB hidmouse Device
usb 1-1.3: Manufacturer: Winbond Electronics Corp
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 3ed9acaa29a36611933525beef60d97d3fecc512'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 6:313:502
rtc_cmos 00:02: setting system clock to 2018-06-14 22:28:50 UTC (1529015330)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1512K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1896K
Freeing unused kernel memory: 76K
systemd-udevd[495]: starting version 204
clocksource: Switched to clocksource tsc
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
hidraw: raw HID events driver (C) Jiri Kosina
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ahci 0000:00:1f.2: version 3.0
mpt3sas version 12.100.00.00 loaded
mpt3sas 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
dca service started, version 1.12.1
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (131999456 kB)
igb: Copyright (c) 2007-2014 Intel Corporation.
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0557:2221.0001/input/input2
hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input0
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xdfc21000 port 0xdfc21100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xdfc21000 port 0xdfc21180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xdfc21000 port 0xdfc21200 irq 29
ata4: SATA max UDMA/133 abar m2048@0xdfc21000 port 0xdfc21280 irq 29
ata5: SATA max UDMA/133 abar m2048@0xdfc21000 port 0xdfc21300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xdfc21000 port 0xdfc21380 irq 29
mpt2sas_cm0: MSI-X vectors supported: 16, no of cores: 24, max_msix_vectors: -1
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 41
mpt2sas0-msix1: PCI-MSI-X enabled: IRQ 42
mpt2sas0-msix2: PCI-MSI-X enabled: IRQ 43
mpt2sas0-msix3: PCI-MSI-X enabled: IRQ 44
mpt2sas0-msix4: PCI-MSI-X enabled: IRQ 45
mpt2sas0-msix5: PCI-MSI-X enabled: IRQ 46
mpt2sas0-msix6: PCI-MSI-X enabled: IRQ 47
mpt2sas0-msix7: PCI-MSI-X enabled: IRQ 48
mpt2sas_cm0: iomem(0x00000000dfa40000), mapped(0xffffc9000cf80000), size(65536)
mpt2sas_cm0: ioport(0x0000000000008000), size(256)
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:e8:6e:20
igb 0000:05:00.0: eth0: PBA No: 020000-000
igb 0000:05:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
mpt2sas_cm0: Allocated physical memory: size(7012 kB)
mpt2sas_cm0: Current Controller Queue Depth(2936),Max Controller Queue Depth(3072)
mpt2sas_cm0: Scatter Gather Elements per IO(128)
igb 0000:05:00.1: added PHC on eth1
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:e8:6e:21
igb 0000:05:00.1: eth1: PBA No: 020000-000
igb 0000:05:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
mpt2sas_cm0: LSISAS2308: FWVersion(16.00.01.00), ChipRevision(0x05), BiosVersion(07.31.00.00)
mpt2sas_cm0: Protocol=(
Initiator
),
Capabilities=(
Raid
,TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host0: Fusion MPT SAS Host
mpt2sas_cm0: sending port enable !!
igb 0000:05:00.2: added PHC on eth2
igb 0000:05:00.2: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 00:25:90:e8:6e:22
igb 0000:05:00.2: eth2: PBA No: 020000-000
igb 0000:05:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:05:00.3: added PHC on eth3
igb 0000:05:00.3: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 00:25:90:e8:6e:23
igb 0000:05:00.3: eth3: PBA No: 020000-000
igb 0000:05:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-11: KINGSTON SUV400S37120G, 0C3J96R9, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi: waiting for bus probes to complete ...
ata4: SATA link down (SStatus 0 SControl 300)
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0557:2221.0002/input/input3
hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input1
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 6146 MB/s
mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x50030480152a6000), phys(8)
raid6: sse2x1 xor() 4705 MB/s
raid6: sse2x2 gen() 7696 MB/s
raid6: sse2x2 xor() 5490 MB/s
raid6: sse2x4 gen() 8852 MB/s
raid6: sse2x4 xor() 6698 MB/s
raid6: using algorithm sse2x4 gen() 8852 MB/s
raid6: .... xor() 6698 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 17426.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
mpt2sas_cm0: expander_add: handle(0x0009), parent(0x0001), sas_addr(0x500304801832233f), phys(30)
mpt2sas_cm0: expander_add: handle(0x0017), parent(0x0002), sas_addr(0x50030480183cf13f), phys(38)
mpt2sas_cm0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:0:0: SATA: handle(0x000a), sas_addr(0x500304801832232c), phy(12), device_name(0x50014ee20cb56bf9)
scsi 0:0:0:0: SATA: enclosure_logical_id(0x500304801832233f), slot(0)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:1:0: SATA: handle(0x000b), sas_addr(0x500304801832232d), phy(13), device_name(0x50014ee2b4977fbb)
scsi 0:0:1:0: SATA: enclosure_logical_id(0x500304801832233f), slot(1)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:2:0: SATA: handle(0x000c), sas_addr(0x500304801832232e), phy(14), device_name(0x50014ee26086397d)
scsi 0:0:2:0: SATA: enclosure_logical_id(0x500304801832233f), slot(2)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:3:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:3:0: SATA: handle(0x000d), sas_addr(0x500304801832232f), phy(15), device_name(0x50014ee208fb7b65)
scsi 0:0:3:0: SATA: enclosure_logical_id(0x500304801832233f), slot(3)
scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:4:0: Direct-Access ATA WDC WD1003FBYX-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:4:0: SATA: handle(0x000e), sas_addr(0x5003048018322330), phy(16), device_name(0x50014ee20566ffca)
scsi 0:0:4:0: SATA: enclosure_logical_id(0x500304801832233f), slot(4)
scsi 0:0:4:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:5:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:5:0: SATA: handle(0x000f), sas_addr(0x5003048018322331), phy(17), device_name(0x50014ee2091ebd04)
scsi 0:0:5:0: SATA: enclosure_logical_id(0x500304801832233f), slot(5)
scsi 0:0:5:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:6:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:6:0: SATA: handle(0x0010), sas_addr(0x5003048018322332), phy(18), device_name(0x50014ee2b622ddd5)
scsi 0:0:6:0: SATA: enclosure_logical_id(0x500304801832233f), slot(6)
scsi 0:0:6:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:7:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:7:0: SATA: handle(0x0011), sas_addr(0x5003048018322333), phy(19), device_name(0x50014ee2b623f35c)
scsi 0:0:7:0: SATA: enclosure_logical_id(0x500304801832233f), slot(7)
scsi 0:0:7:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:8:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:8:0: SATA: handle(0x0012), sas_addr(0x5003048018322334), phy(20), device_name(0x50014ee2b497ae81)
scsi 0:0:8:0: SATA: enclosure_logical_id(0x500304801832233f), slot(8)
scsi 0:0:8:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:9:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:9:0: SATA: handle(0x0013), sas_addr(0x5003048018322335), phy(21), device_name(0x50014ee2086fe758)
scsi 0:0:9:0: SATA: enclosure_logical_id(0x500304801832233f), slot(9)
scsi 0:0:9:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:10:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:10:0: SATA: handle(0x0014), sas_addr(0x5003048018322336), phy(22), device_name(0x50014ee2b367043e)
scsi 0:0:10:0: SATA: enclosure_logical_id(0x500304801832233f), slot(10)
scsi 0:0:10:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:11:0: Direct-Access ATA WDC WD1003FBYX-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:11:0: SATA: handle(0x0015), sas_addr(0x5003048018322337), phy(23), device_name(0x50014ee2b440f85c)
scsi 0:0:11:0: SATA: enclosure_logical_id(0x500304801832233f), slot(11)
scsi 0:0:11:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:12:0: Enclosure LSI SAS2X28 0e12 PQ: 0 ANSI: 5
scsi 0:0:12:0: set ignore_delay_remove for handle(0x0016)
scsi 0:0:12:0: SES: handle(0x0016), sas_addr(0x500304801832233d), phy(28), device_name(0x0000000000000000)
scsi 0:0:12:0: SES: enclosure_logical_id(0x500304801832233f), slot(0)
scsi 0:0:13:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:13:0: SATA: handle(0x0018), sas_addr(0x50030480183cf10c), phy(12), device_name(0x50014ee25e0e6bee)
scsi 0:0:13:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(0)
scsi 0:0:13:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:14:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:14:0: SATA: handle(0x0019), sas_addr(0x50030480183cf10d), phy(13), device_name(0x50014ee25e117a29)
scsi 0:0:14:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(1)
scsi 0:0:14:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:15:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:15:0: SATA: handle(0x001a), sas_addr(0x50030480183cf10e), phy(14), device_name(0x50014ee2b287b13b)
scsi 0:0:15:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(2)
scsi 0:0:15:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:16:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:16:0: SATA: handle(0x001b), sas_addr(0x50030480183cf10f), phy(15), device_name(0x50014ee25dd0d2e8)
scsi 0:0:16:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(3)
scsi 0:0:16:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:17:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:17:0: SATA: handle(0x001c), sas_addr(0x50030480183cf110), phy(16), device_name(0x50014ee25dd15d41)
scsi 0:0:17:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(4)
scsi 0:0:17:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:18:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:18:0: SATA: handle(0x001d), sas_addr(0x50030480183cf111), phy(17), device_name(0x50014ee2b326e1f1)
scsi 0:0:18:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(5)
scsi 0:0:18:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:19:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:19:0: SATA: handle(0x001e), sas_addr(0x50030480183cf112), phy(18), device_name(0x50014ee25fae1fe9)
scsi 0:0:19:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(6)
scsi 0:0:19:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:20:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:20:0: SATA: handle(0x001f), sas_addr(0x50030480183cf113), phy(19), device_name(0x50014ee25d3203f1)
scsi 0:0:20:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(7)
scsi 0:0:20:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:21:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:21:0: SATA: handle(0x0020), sas_addr(0x50030480183cf114), phy(20), device_name(0x50014ee25ea76b05)
scsi 0:0:21:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(8)
scsi 0:0:21:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:22:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:22:0: SATA: handle(0x0021), sas_addr(0x50030480183cf115), phy(21), device_name(0x50014ee2b3e0d1bb)
scsi 0:0:22:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(9)
scsi 0:0:22:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:23:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:23:0: SATA: handle(0x0022), sas_addr(0x50030480183cf116), phy(22), device_name(0x50014ee2b3635afc)
scsi 0:0:23:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(10)
scsi 0:0:23:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:24:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 6
scsi 0:0:24:0: SATA: handle(0x0023), sas_addr(0x50030480183cf117), phy(23), device_name(0x50014ee20904dc51)
scsi 0:0:24:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(11)
scsi 0:0:24:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:25:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:25:0: SATA: handle(0x0024), sas_addr(0x50030480183cf118), phy(24), device_name(0x50014ee26134cd3e)
scsi 0:0:25:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(12)
scsi 0:0:25:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:26:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:26:0: SATA: handle(0x0025), sas_addr(0x50030480183cf119), phy(25), device_name(0x50014ee209ec8c79)
scsi 0:0:26:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(13)
scsi 0:0:26:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:27:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:27:0: SATA: handle(0x0026), sas_addr(0x50030480183cf11a), phy(26), device_name(0x50014ee209eb0463)
scsi 0:0:27:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(14)
scsi 0:0:27:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:28:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:28:0: SATA: handle(0x0027), sas_addr(0x50030480183cf11b), phy(27), device_name(0x50014ee2b493bc34)
scsi 0:0:28:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(15)
scsi 0:0:28:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:29:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:29:0: SATA: handle(0x0028), sas_addr(0x50030480183cf11c), phy(28), device_name(0x50014ee209e7499c)
scsi 0:0:29:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(16)
scsi 0:0:29:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:30:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:30:0: SATA: handle(0x0029), sas_addr(0x50030480183cf11d), phy(29), device_name(0x50014ee2b4977ffe)
scsi 0:0:30:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(17)
scsi 0:0:30:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:31:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:31:0: SATA: handle(0x002a), sas_addr(0x50030480183cf11e), phy(30), device_name(0x50014ee25f4043ed)
scsi 0:0:31:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(18)
scsi 0:0:31:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:32:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:32:0: SATA: handle(0x002b), sas_addr(0x50030480183cf11f), phy(31), device_name(0x50014ee260c1e7c3)
scsi 0:0:32:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(19)
scsi 0:0:32:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:33:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:33:0: SATA: handle(0x002c), sas_addr(0x50030480183cf120), phy(32), device_name(0x50014ee209e7c69a)
scsi 0:0:33:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(20)
scsi 0:0:33:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:34:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:34:0: SATA: handle(0x002d), sas_addr(0x50030480183cf121), phy(33), device_name(0x50014ee2b6226725)
scsi 0:0:34:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(21)
scsi 0:0:34:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:35:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:35:0: SATA: handle(0x002e), sas_addr(0x50030480183cf122), phy(34), device_name(0x50014ee2b495f798)
scsi 0:0:35:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(22)
scsi 0:0:35:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:36:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 6
scsi 0:0:36:0: SATA: handle(0x002f), sas_addr(0x50030480183cf123), phy(35), device_name(0x50014ee25f403ec1)
scsi 0:0:36:0: SATA: enclosure_logical_id(0x50030480183cf13f), slot(23)
scsi 0:0:36:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:37:0: Enclosure LSI SAS2X36 0e12 PQ: 0 ANSI: 5
scsi 0:0:37:0: set ignore_delay_remove for handle(0x0030)
scsi 0:0:37:0: SES: handle(0x0030), sas_addr(0x50030480183cf13d), phy(36), device_name(0x0000000000000000)
scsi 0:0:37:0: SES: enclosure_logical_id(0x50030480183cf13f), slot(24)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
sd 0:0:3:0: Attached scsi generic sg3 type 0
sd 0:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:4:0: Attached scsi generic sg4 type 0
sd 0:0:5:0: Attached scsi generic sg5 type 0
sd 0:0:6:0: Attached scsi generic sg6 type 0
sd 0:0:2:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:3:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:7:0: Attached scsi generic sg7 type 0
sd 0:0:8:0: Attached scsi generic sg8 type 0
sd 0:0:9:0: Attached scsi generic sg9 type 0
sd 0:0:10:0: Attached scsi generic sg10 type 0
sd 0:0:4:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:5:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:11:0: Attached scsi generic sg11 type 0
sd 0:0:6:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:7:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
scsi 0:0:12:0: Attached scsi generic sg12 type 13
sd 0:0:13:0: Attached scsi generic sg13 type 0
sd 0:0:14:0: Attached scsi generic sg14 type 0
sd 0:0:15:0: Attached scsi generic sg15 type 0
sd 0:0:10:0: [sdk] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:8:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:9:0: [sdj] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:16:0: Attached scsi generic sg16 type 0
sd 0:0:17:0: Attached scsi generic sg17 type 0
sd 0:0:11:0: [sdl] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:18:0: Attached scsi generic sg18 type 0
sd 0:0:19:0: Attached scsi generic sg19 type 0
sd 0:0:13:0: [sdm] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:14:0: [sdn] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:20:0: Attached scsi generic sg20 type 0
sd 0:0:16:0: [sdp] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:21:0: Attached scsi generic sg21 type 0
sd 0:0:15:0: [sdo] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:22:0: Attached scsi generic sg22 type 0
sd 0:0:17:0: [sdq] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:18:0: [sdr] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:23:0: Attached scsi generic sg23 type 0
sd 0:0:24:0: Attached scsi generic sg24 type 0
sd 0:0:25:0: Attached scsi generic sg25 type 0
sd 0:0:22:0: [sdv] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:19:0: [sds] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:26:0: Attached scsi generic sg26 type 0
sd 0:0:24:0: [sdx] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:27:0: Attached scsi generic sg27 type 0
sd 0:0:21:0: [sdu] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:23:0: [sdw] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:28:0: Attached scsi generic sg28 type 0
sd 0:0:20:0: [sdt] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:29:0: Attached scsi generic sg29 type 0
sd 0:0:25:0: [sdy] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:30:0: Attached scsi generic sg30 type 0
sd 0:0:26:0: [sdz] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:27:0: [sdaa] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:31:0: Attached scsi generic sg31 type 0
sd 0:0:28:0: [sdab] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:29:0: [sdac] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:30:0: [sdad] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:32:0: Attached scsi generic sg32 type 0
sd 0:0:31:0: [sdae] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:33:0: Attached scsi generic sg33 type 0
sd 0:0:34:0: Attached scsi generic sg34 type 0
sd 0:0:35:0: Attached scsi generic sg35 type 0
sd 0:0:32:0: [sdaf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:5:0: [sdf] Write Protect is off
sd 0:0:36:0: Attached scsi generic sg36 type 0
sd 0:0:5:0: [sdf] Mode Sense: 7f 00 10 08
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 7f 00 10 08
scsi 0:0:37:0: Attached scsi generic sg37 type 13
sd 0:0:3:0: [sdd] Write Protect is off
sd 0:0:33:0: [sdag] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:3:0: [sdd] Mode Sense: 7f 00 10 08
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 7f 00 10 08
sd 0:0:10:0: [sdk] Write Protect is off
sd 0:0:10:0: [sdk] Mode Sense: 7f 00 10 08
scsi 1:0:0:0: Direct-Access ATA KINGSTON SUV400S 96R9 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdak] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdak] 4096-byte physical blocks
sd 1:0:0:0: [sdak] Write Protect is off
sd 1:0:0:0: [sdak] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdak] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg38 type 0
sd 0:0:16:0: [sdp] Write Protect is off
sd 0:0:16:0: [sdp] Mode Sense: 7f 00 10 08
sd 0:0:7:0: [sdh] Write Protect is off
sd 0:0:7:0: [sdh] Mode Sense: 7f 00 10 08
sd 0:0:34:0: [sdah] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:35:0: [sdai] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:36:0: [sdaj] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:4:0: [sde] Write Protect is off
sd 0:0:4:0: [sde] Mode Sense: 7f 00 10 08
sdak: sdak1 sdak2
sd 0:0:10:0: [sdk] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:22:0: [sdv] Write Protect is off
sd 0:0:22:0: [sdv] Mode Sense: 7f 00 10 08
sd 0:0:24:0: [sdx] Write Protect is off
sd 0:0:24:0: [sdx] Mode Sense: 7f 00 10 08
sd 1:0:0:0: [sdak] Attached SCSI disk
sd 0:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:9:0: [sdj] Write Protect is off
sd 0:0:9:0: [sdj] Mode Sense: 7f 00 10 08
sd 0:0:16:0: [sdp] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:8:0: [sdi] Write Protect is off
sd 0:0:8:0: [sdi] Mode Sense: 7f 00 10 08
sd 0:0:22:0: [sdv] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:24:0: [sdx] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:6:0: [sdg] Write Protect is off
sd 0:0:6:0: [sdg] Mode Sense: 7f 00 10 08
sd 0:0:4:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:17:0: [sdq] Write Protect is off
sd 0:0:17:0: [sdq] Mode Sense: 7f 00 10 08
sd 0:0:18:0: [sdr] Write Protect is off
sd 0:0:18:0: [sdr] Mode Sense: 7f 00 10 08
sd 0:0:7:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:11:0: [sdl] Write Protect is off
sd 0:0:11:0: [sdl] Mode Sense: 7f 00 10 08
sd 0:0:19:0: [sds] Write Protect is off
sd 0:0:19:0: [sds] Mode Sense: 7f 00 10 08
sd 0:0:14:0: [sdn] Write Protect is off
sd 0:0:14:0: [sdn] Mode Sense: 7f 00 10 08
sd 0:0:23:0: [sdw] Write Protect is off
sd 0:0:23:0: [sdw] Mode Sense: 7f 00 10 08
sd 0:0:9:0: [sdj] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:15:0: [sdo] Write Protect is off
sd 0:0:15:0: [sdo] Mode Sense: 7f 00 10 08
sd 0:0:8:0: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:13:0: [sdm] Write Protect is off
sd 0:0:13:0: [sdm] Mode Sense: 7f 00 10 08
sd 0:0:21:0: [sdu] Write Protect is off
sd 0:0:21:0: [sdu] Mode Sense: 7f 00 10 08
sd 0:0:6:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:17:0: [sdq] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:20:0: [sdt] Write Protect is off
sd 0:0:20:0: [sdt] Mode Sense: 7f 00 10 08
sd 0:0:25:0: [sdy] Write Protect is off
sd 0:0:25:0: [sdy] Mode Sense: 7f 00 10 08
sd 0:0:18:0: [sdr] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:30:0: [sdad] Write Protect is off
sd 0:0:30:0: [sdad] Mode Sense: 7f 00 10 08
sd 0:0:23:0: [sdw] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:26:0: [sdz] Write Protect is off
sd 0:0:26:0: [sdz] Mode Sense: 7f 00 10 08
sd 0:0:19:0: [sds] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:28:0: [sdab] Write Protect is off
sd 0:0:28:0: [sdab] Mode Sense: 7f 00 10 08
sd 0:0:11:0: [sdl] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:21:0: [sdu] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:31:0: [sdae] Write Protect is off
sd 0:0:31:0: [sdae] Mode Sense: 7f 00 10 08
sd 0:0:15:0: [sdo] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:29:0: [sdac] Write Protect is off
sd 0:0:29:0: [sdac] Mode Sense: 7f 00 10 08
sd 0:0:27:0: [sdaa] Write Protect is off
sd 0:0:27:0: [sdaa] Mode Sense: 7f 00 10 08
sd 0:0:13:0: [sdm] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:14:0: [sdn] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:32:0: [sdaf] Write Protect is off
sd 0:0:32:0: [sdaf] Mode Sense: 7f 00 10 08
sd 0:0:20:0: [sdt] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:30:0: [sdad] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:25:0: [sdy] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:31:0: [sdae] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:35:0: [sdai] Write Protect is off
sd 0:0:35:0: [sdai] Mode Sense: 7f 00 10 08
sd 0:0:36:0: [sdaj] Write Protect is off
sd 0:0:36:0: [sdaj] Mode Sense: 7f 00 10 08
sd 0:0:32:0: [sdaf] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:27:0: [sdaa] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:33:0: [sdag] Write Protect is off
sd 0:0:33:0: [sdag] Mode Sense: 7f 00 10 08
sd 0:0:26:0: [sdz] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:29:0: [sdac] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:28:0: [sdab] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:34:0: [sdah] Write Protect is off
sd 0:0:34:0: [sdah] Mode Sense: 7f 00 10 08
sd 0:0:36:0: [sdaj] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:35:0: [sdai] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:33:0: [sdag] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:34:0: [sdah] Write cache: enabled, read cache: enabled, supports DPO and FUA
random: nonblocking pool is initialized
EXT4-fs (sdak1): mounted filesystem with ordered data mode. Opts: (null)
sd 0:0:24:0: [sdx] Attached SCSI disk
sd 0:0:22:0: [sdv] Attached SCSI disk
sd 0:0:10:0: [sdk] Attached SCSI disk
sd 0:0:8:0: [sdi] Attached SCSI disk
sd 0:0:3:0: [sdd] Attached SCSI disk
sd 0:0:5:0: [sdf] Attached SCSI disk
sd 0:0:23:0: [sdw] Attached SCSI disk
sd 0:0:9:0: [sdj] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:7:0: [sdh] Attached SCSI disk
sd 0:0:16:0: [sdp] Attached SCSI disk
sd 0:0:21:0: [sdu] Attached SCSI disk
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:17:0: [sdq] Attached SCSI disk
sd 0:0:18:0: [sdr] Attached SCSI disk
sd 0:0:4:0: [sde] Attached SCSI disk
sd 0:0:25:0: [sdy] Attached SCSI disk
sd 0:0:13:0: [sdm] Attached SCSI disk
sd 0:0:30:0: [sdad] Attached SCSI disk
sd 0:0:20:0: [sdt] Attached SCSI disk
sd 0:0:6:0: [sdg] Attached SCSI disk
sd 0:0:19:0: [sds] Attached SCSI disk
sd 0:0:15:0: [sdo] Attached SCSI disk
sd 0:0:31:0: [sdae] Attached SCSI disk
sd 0:0:14:0: [sdn] Attached SCSI disk
sd 0:0:34:0: [sdah] Attached SCSI disk
sd 0:0:11:0: [sdl] Attached SCSI disk
sd 0:0:36:0: [sdaj] Attached SCSI disk
sd 0:0:26:0: [sdz] Attached SCSI disk
sd 0:0:32:0: [sdaf] Attached SCSI disk
sd 0:0:28:0: [sdab] Attached SCSI disk
sd 0:0:27:0: [sdaa] Attached SCSI disk
sd 0:0:35:0: [sdai] Attached SCSI disk
sd 0:0:29:0: [sdac] Attached SCSI disk
sd 0:0:33:0: [sdag] Attached SCSI disk
ses 0:0:12:0: Attached Enclosure device
ses 0:0:37:0: Attached Enclosure device
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 7f 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:0:0: [sda] Attached SCSI disk
Adding 1985420k swap on /dev/sdak2. Priority:-1 extents:1 across:1985420k SSFS
EXT4-fs (sdak1): re-mounted. Opts: errors=remount-ro
systemd-udevd[1115]: starting version 204
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
FS-Cache: Netfs 'nfs' registered for caching
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ioatdma: Intel(R) QuickData Technology Driver 4.00
igb 0000:05:00.0: DCA enabled
igb 0000:05:00.1: DCA enabled
igb 0000:05:00.2: DCA enabled
igb 0000:05:00.3: DCA enabled
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:7f:0e.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:ff:0e.0 (POLLED)
EDAC sbridge: Ver: 1.1.1
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0702, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
audit: type=1400 audit(1529015345.955:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2010 comm="apparmor_parser"
audit: type=1400 audit(1529015345.955:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2010 comm="apparmor_parser"
audit: type=1400 audit(1529015345.955:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2010 comm="apparmor_parser"
audit: type=1400 audit(1529015345.955:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=2008 comm="apparmor_parser"
audit: type=1400 audit(1529015345.955:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2008 comm="apparmor_parser"
audit: type=1400 audit(1529015345.955:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2008 comm="apparmor_parser"
audit: type=1400 audit(1529015345.959:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=2045 comm="apparmor_parser"
audit: type=1400 audit(1529015345.959:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2045 comm="apparmor_parser"
audit: type=1400 audit(1529015345.959:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2045 comm="apparmor_parser"
audit: type=1400 audit(1529015345.967:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=2054 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
cgroup: systemd-logind (1252) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81efd100)
igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
8021q: 802.1Q VLAN Support v1.8
8021q: adding VLAN 0 to HW filter on device eth0
ipmi device interface
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
audit_printk_skb: 30 callbacks suppressed
audit: type=1400 audit(1529015391.929:22): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/etc/ld.so.preload" pid=3907 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
init: plymouth-upstart-bridge main process ended, respawning
ip6_tables: (C) 2000-2006 Netfilter Core Team
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
audit: type=1400 audit(1529015466.739:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/libvirtd" pid=4617 comm="apparmor_parser"
audit: type=1400 audit(1529015466.739:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=4615 comm="apparmor_parser"
audit: type=1400 audit(1529015466.739:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/dhcpd" pid=4616 comm="apparmor_parser"
audit: type=1400 audit(1529015466.739:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=4618 comm="apparmor_parser"
audit: type=1400 audit(1529015466.739:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=4620 comm="apparmor_parser"
audit: type=1400 audit(1529015466.739:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=4614 comm="apparmor_parser"
audit: type=1400 audit(1529015466.739:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=4614 comm="apparmor_parser"
audit: type=1400 audit(1529015466.739:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=4614 comm="apparmor_parser"
init: plymouth-stop pre-start process (5121) terminated with status 1
zavl: loading out-of-tree module taints kernel.
zavl: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
zavl: module verification failed: signature and/or required key missing - tainting kernel
SPL: Loaded module v0.7.8.datto-45.1ubuntu14.04
ZFS: Loaded module v0.7.8.datto-26.1ubuntu14.04, ZFS pool version 5000, ZFS filesystem version 5
device vpn11510c entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vpn11510b: link is not ready
IPv6: ADDRCONF(NETDEV_UP): vpn11510c: link is not ready
device tap11510 entered promiscuous mode
vpn11510b: port 2(tap11510) entered forwarding state
vpn11510b: port 2(tap11510) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vpn11510b: link becomes ready
vpn11510b: port 2(tap11510) entered forwarding state
EXT4-fs (dm-36): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-36): mounted filesystem with ordered data mode. Opts: (null)
device dummy0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): brTest: link is not ready
brTest: port 1(dummy0) entered forwarding state
brTest: port 1(dummy0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): brTest: link becomes ready
audit: type=1400 audit(1529016030.212:31): apparmor="DENIED" operation="open" profile="/usr/sbin/tcpdump" name="/etc/ld.so.preload" pid=14907 comm="tcpdump" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
device dummy0 left promiscuous mode
brTest: port 1(dummy0) entered disabled state
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (dm-36): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-36): mounted filesystem with ordered data mode. Opts: (null)
device dummy0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): brTest: link is not ready
brTest: port 1(dummy0) entered forwarding state
brTest: port 1(dummy0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): brTest: link becomes ready
audit: type=1400 audit(1529016733.052:32): apparmor="DENIED" operation="open" profile="/usr/sbin/tcpdump" name="/etc/ld.so.preload" pid=25535 comm="tcpdump" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
device dummy0 left promiscuous mode
brTest: port 1(dummy0) entered disabled state
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: discard
python2 (2560): drop_caches: 3
python2 (2560): drop_caches: 3
python2 (2888): drop_caches: 3
python2 (2888): drop_caches: 3
python2 (3325): drop_caches: 3
python2 (3325): drop_caches: 3
perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000